Multi-Tap Settings: Gauntlet 4.

If you simply want to play the 1 or 2 player modes then the 'normal' setup with 2 controllers as as shown on the right is fine. Gauntlet 4 also supports up to 4 Players, and expects a Multi-Tap to be connected on Port1 with 4 controllers as shown below.

Port 1 Port 2 Player 1 Player 2

In the Controller Settings window select Teamplayer on Port 1 and setup your Keys/Joypads for Player 1 (Player1), Player 1-B (Player 2), Player 1-C (Player 3) and Player 1-D (Player 4). You can save this setup to a file, for example "Gauntlet.cfg" using the Save Config... option for later use. You will need to reset (press Tab) for the changes to take effect. This configuration also works in the 1, 2 and 3 Player modes using the controllers in Player 1 (Player 1) and Player 1-B (Player 2) and Player 1-C (Player 3). Port 1 Port 2 Not Used Player 1 Player 2 (1-B) Player 3 (1-C) Player 4 (1-D)